Letter Perfect

April 1, 2008

Font selection is important with small letters. Here, No. 1 is too thin, while No. 2 is too fat, causing letters to close up when sewn. No. 3 is acceptable, but the letters should be wider. No. 4 is the optimum font — it is wide enough and properly spaced.

Digitizing small lettering can be a challenge, but it's important to remember that every stitch in a small letter matters. Stitches must be perfectly placed and connected, including the tie-off stitches. It has been said that a good digitizer can digitize small letters with any digitizing system. However, some digitizing packages do this better than others, depending on the mathematical formulas programmed into the software.

Stitches tend to become erratic and don't hold consistent length or spacing on extremely narrow or short columns, or when going around a curve or a corner. On the other hand, if a digitizer knows what the stitches should look like, he can make adjustments in the software or manually digitize the stitches to sew properly. Here are some other helpful hints for solving small-lettering issues:

• Choose a font with column strokes that are neither too wide nor too narrow. Fonts with thick column strokes cause the inside of small letters such as "a" and "p" to close up, causing a hole in the garment. Fonts that are too narrow can look inadequate, even if they are digitized well.

• Carefully digitizing corners also is important. Keep in mind the pull effect of the top and bottom threads, and make sure to exaggerate the inside and outside of corners. By placing inputs slightly "in" on the inside corners and slightly "out" on the outside corners, you'll notice a world of difference with finished products.

— From the EMB archives

8 Tips for Embroidering with Metallics
Think of metallic embroidery thread as the equivalent of the foil effect popular on screen printed T-shirts sold at retail today. It adds a similar trendy look whether used in concert with other apparel decoration applications or alone.
June 09, 2008

Digitizing Designs for Terrycloth
Don't forget these important tips when creating a digital embroidery design file to sew out on towels and other deep-pile fabrics.
Monogramming bath towels and bathrobes can be a lucrative niche for embroiderers. Upscale department stores and linen shops are eager to set up arrangements with embroiderers who can monogram towels as wedding gifts.
May 22, 2008

New Threads Provide Paint for the Embroidery Palette
The latest embroidery threads include unique materials designed to create special eye-catching effects, improve production efficiency and open new markets.
It's easy to marvel at the technical sophistication of today's computerized embroidery machines and overlook the more mundane role of thread in the embroidery process.
April 29, 2008

Embroidery Backings: What Goes Where?
When deciding which stabilizer to use, you also need to consider the material to be embroidered.
Previously, we explained the need for backings or stabilizers behind the fabric while it's being embroidered (see "Stabilizers: The Foundation of Embroidery"). Now we want to focus on the what and the where.

Stabilizers can be broken down into two major categories: cutaways and tearaways. While there are many weights and types of each of these, I recommend keeping the decision of which to use as simple as possible.
April 14, 2008

To Patch or Not to Patch
When a customer requests patches, first determine whether you should handle the order yourself or outsource it.
April 01, 2008