Fearless Fleece Printing

December 07, 2009

Screen printing on fleece fabric is difficult because the material is more loosely knit and thicker than a T-shirt, so it requires laying more ink on top of the garment to make the print sharp. Use these seven tips for easing the learning curve of this printing challenge.

1. Minimize artwork detail. Bold, thick prints work better on fleece fabric than thin, detailed designs.

2. Right mesh — right tension. Be prepared to lay down more ink without too much pressure. If your normal job calls for 125 monofilament mesh, lower it to 86 for fleece. Also, use retensionable frames because the higher tension screen lets the ink clear out with less squeegee pressure. Screens tensioned to 35 to 40 Newtons will provide sharp prints. Finally, get a cleaner print by adjusting your off contact to higher than normal to account for the thicker material.

3. Use a medium or medium-hard squeegee. A hard blade requires more pressure to get the ink through the screen and will drive the ink into the garment. Also, use a lighter stroke (maybe two) so you don’t have to muscle the ink.

4. Use thicker inks. If ink is too thin, it will “gain” more and fall into the material when the print should lie on top of fleece fabric.

5. Minimize bleeding. Use a low-bleed ink on 50/50 fleece fabric. For best results, do a print/flash/cure/print again sequence or print an underbase of low-bleed or fast-fusion white ink to give a smooth surface for the top colors.

6. Stick to it. Be prepared to use spray adhesive after each print, or use pallet tape or pallet paper that has adhesive on both sides. Another alternative is to use a pallet cover that has adhesive on one side, then apply spray adhesive to the other.

7. Take the temperature. Keep the garment surface temperature around 325°F because light-colored material can scorch and dark 50/50 fleece fabric may bleed. If you are printing a white underbase, the garment may actually move or shrink slightly, so use plenty of adhesive and keep flashing times to a minimum.

— From the Impressions archives 



Quick Registration Tricks (With Video!)
Registration can be incredibly frustrating — for beginning screen printers and veteran decorators alike. Learn a simple and efficient trick to help make registration much easier!
May 07, 2012

First Person: How Is CPSIA Legislation Affecting the Garment Industry?
Is the CPSIA legislation affecting the garment industry? In my opinion, yes. Garment decorators seem to be manufacturing around the CPSIA regulations because it is probably easier (and in the long run, cheaper) to do more patch work and embroidery than to do screen printing.
May 07, 2012

Future Leaders
The 2012 Impressions Awards Student Decorating Competition honors tomorrow’s decorated apparel industry entrepreneurs.
April 27, 2012

From Paris with Love
Transparency with customers and weekends at the shop help define a way of life at Paris Images Screen Printing — and the owners wouldn’t have it any other way.
April 27, 2012

Screen Printing Artwork for Beginners, Part 1
Setting up your screen printing shop’s art department is just the tip of the iceberg. Follow these tips to learn how to re-create the common types of artwork that customers will bring into your shop.
April 27, 2012