May 2, 2016
Many printers use what is often called a “mat-down” screen to give their finished products a smooth or soft-hand feel.
This additional screen helps to mat down fibers in the garment and can help with fibrillation issues. Generally, a mat-down screen is used for printing on dark fabrics when a smooth or soft-hand print is desired, but it also can be used when printing on a white or light fabric to help with fibrillation issues.
For light fabrics, clear gel can be used to mat down the fibers, and for dark fabrics, white ink is typically used as an underbase.
Here’s how it’s done:
– Coat a 160-mesh (or higher) screen with emulsion. Be sure the emulsion is smooth without any bubbles or blemishes and the tension of the screen is very tight. The resulting smoothness of the print will mirror the smoothness of the screen.
– Expose the screen (devoid of any image).
– Now, add the blank screen after the initial flash of the white or clear underbase, but before the next print screen. Extra off-contact will be required to help peel the screen away from the printed image.
– Use a hard squeegee.
– Next, add a dab of “grease” such as White Lithium Grease, an all-purpose lubricant, to the screen. The grease is used as lubrication so that the squeegee moves easily across the screen. Regular plastisol ink can be and is often used for lubrication; however, the grease will not harden over time as ink is likely to do when exposed to prolonged heat.
Now comes the “hard” part. For best results, mat-down printing must be done quickly after the flash, while the white is still in a gel state. Do not over-flash the white underbase, as this will otherwise increase the hardness of the ink, thus reducing the desired effect.
Be sure to practice the timing of the flash and mat-down screen printing. If not timed correctly, the ink can stick — either when it’s under- or over-cured.
Adding a mat-down screen creates a smooth ink surface and mats the fabric fibers down. This, in turn, can give an overall print an incredibly soft hand.
Kieth Stevens is the Western regional sales manager for International Coatings. He has been teaching screen printing for more than 10 years and is a regular contributor to International Coatings’ blogs. For more information, visit iccink.com and read the company’s blog at internationalcoatingsblog.com.
March 20, 2024 | Production
As with pretty much any business, one of the keys for apparel and T-shirt decorators running a successful custom screen-printing shop is having the right equipment, first and foremost, the right press, or presses.
FULL STORY
March 15, 2024 | Production
As is the case with flash units and dryers, screen exposure units, computer-to-screen-systems and washout booths are critical to successful screen printing of T-shirts and other apparel
FULL STORY
January 16, 2024 | Production
Go to any industry trade show or visit an actual custom apparel screen-printing shop, and your eyes will naturally be drawn to the press, or presses there. This is true whether the shop in question employs a single manual press or is running multiple autos.
FULL STORY